View source with raw comments or as raw
    1/*  Part of SWI-Prolog
    2
    3    Author:        Jan Wielemaker
    4    E-mail:        J.Wielemaker@vu.nl
    5    WWW:           http://www.swi-prolog.org
    6    Copyright (c)  2000-2022, University of Amsterdam
    7                              VU University Amsterdam
    8                              SWI-Prolog Solutions b.v.
    9    All rights reserved.
   10
   11    Redistribution and use in source and binary forms, with or without
   12    modification, are permitted provided that the following conditions
   13    are met:
   14
   15    1. Redistributions of source code must retain the above copyright
   16       notice, this list of conditions and the following disclaimer.
   17
   18    2. Redistributions in binary form must reproduce the above copyright
   19       notice, this list of conditions and the following disclaimer in
   20       the documentation and/or other materials provided with the
   21       distribution.
   22
   23    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
   24    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
   25    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
   26    FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
   27    COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
   28    INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
   29    BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
   30    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
   31    CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
   32    LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
   33    ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
   34    POSSIBILITY OF SUCH DAMAGE.
   35*/
   36
   37:- module(unix,
   38          [ fork/1,                     % -'client'|pid
   39            exec/1,                     % +Command(...Args...)
   40            fork_exec/1,                % +Command(...Args...)
   41            wait/2,                     % -Pid, -Reason
   42            kill/2,                     % +Pid. +Signal
   43            pipe/2,                     % +Read, +Write
   44            dup/2,                      % +From, +To
   45            detach_IO/0,
   46            detach_IO/1,                % +Stream
   47            environ/1                   % -[Name=Value]
   48          ]).

Unix specific operations

The library(unix) library provides the commonly used Unix primitives to deal with process management. These primitives are useful for many tasks, including server management, parallel computation, exploiting and controlling other processes, etc.

The predicates in this library are modelled closely after their native Unix counterparts.

See also
- library(process) provides a portable high level interface to create and manage processes. */
   64:- use_foreign_library(foreign(unix)).
 fork(-Pid) is det
Clone the current process into two branches. In the child, Pid is unified to child. In the original process, Pid is unified to the process identifier of the created child. Both parent and child are fully functional Prolog processes running the same program. The processes share open I/O streams that refer to Unix native streams, such as files, sockets and pipes. Data is not shared, though on most Unix systems data is initially shared and duplicated only if one of the programs attempts to modify the data.

Unix fork() is the only way to create new processes and fork/1 is a simple direct interface to it.

Errors
- permission_error(fork, process, main) is raised if the calling thread is not the only thread in the process. Forking a Prolog process with threads will typically deadlock because only the calling thread is cloned in the fork, while all thread synchronization are cloned.
   88fork(Pid) :-
   89    fork_warn_threads,
   90    fork_(Pid).
 fork_warn_threads
See whether we are the only thread. If not, we cannot fork
   96fork_warn_threads :-
   97    set_prolog_gc_thread(stop),
   98    findall(T, other_thread(T), Others),
   99    (   Others == []
  100    ->  true
  101    ;   throw(error(permission_error(fork, process, main),
  102                    context(_, running_threads(Others))))
  103    ).
  104
  105other_thread(T) :-
  106    thread_self(Me),
  107    thread_property(T, status(Status)),
  108    T \== Me,
  109    (   Status == running
  110    ->  true
  111    ;   print_message(warning, fork(join(T, Status))),
  112        thread_join(T, _),
  113        fail
  114    ).
 fork_exec(+Command) is det
Fork (as fork/1) and exec (using exec/1) the child immediately. This behaves as the code below, but bypasses the check for the existence of other threads because this is a safe scenario.
fork_exec(Command) :-
      (   fork(child)
      ->  exec(Command)
      ;   true
      ).
  130fork_exec(Command) :-
  131    (   fork_(child)
  132    ->  exec(Command)
  133    ;   true
  134    ).
 exec(+Command)
Replace the running program by starting Command. Command is a callable term. The functor is the command and the arguments provide the command-line arguments for the command. Each command-line argument must be atomic and is converted to a string before passed to the Unix call execvp(). Here are some examples:

Unix exec() is the only way to start an executable file executing. It is commonly used together with fork/1. For example to start netscape on an URL in the background, do:

run_netscape(URL) :-
        (    fork(child),
             exec(netscape(URL))
        ;    true
        ).

Using this code, netscape remains part of the process-group of the invoking Prolog process and Prolog does not wait for netscape to terminate. The predicate wait/2 allows waiting for a child, while detach_IO/0 disconnects the child as a deamon process.

 wait(?Pid, -Status) is det
Wait for a child to change status. Then report the child that changed status as well as the reason. If Pid is bound on entry then the status of the specified child is reported. If not, then the status of any child is reported. Status is unified with exited(ExitCode) if the child with pid Pid was terminated by calling exit() (Prolog halt/1). ExitCode is the return status. Status is unified with signaled(Signal) if the child died due to a software interrupt (see kill/2). Signal contains the signal number. Finally, if the process suspended execution due to a signal, Status is unified with stopped(Signal).
 kill(+Pid, +Signal) is det
Deliver a software interrupt to the process with identifier Pid using software-interrupt number Signal. See also on_signal/2. Signals can be specified as an integer or signal name, where signal names are derived from the C constant by dropping the SIG prefix and mapping to lowercase. E.g. int is the same as SIGINT in C. The meaning of the signal numbers can be found in the Unix manual.
 pipe(-InSream, -OutStream) is det
Create a communication-pipe. This is normally used to make a child communicate to its parent. After pipe/2, the process is cloned and, depending on the desired direction, both processes close the end of the pipe they do not use. Then they use the remaining stream to communicate. Here is a simple example:
:- use_module(library(unix)).

fork_demo(Result) :-
        pipe(Read, Write),
        fork(Pid),
        (   Pid == child
        ->  close(Read),
            format(Write, '~q.~n',
                   [hello(world)]),
            flush_output(Write),
            halt
        ;   close(Write),
            read(Read, Result),
            close(Read)
        ).
 dup(+FromStream, +ToStream) is det
Interface to Unix dup2(), copying the underlying filedescriptor and thus making both streams point to the same underlying object. This is normally used together with fork/1 and pipe/2 to talk to an external program that is designed to communicate using standard I/O.

Both FromStream and ToStream either refer to a Prolog stream or an integer descriptor number to refer directly to OS descriptors. See also demo/pipe.pl in the source-distribution of this package.

 detach_IO(+Stream) is det
This predicate is intended to create Unix deamon processes. It performs two actions.
  1. The I/O streams user_input, user_output and user_error are closed if they are connected to a terminal (see tty property in stream_property/2). Input streams are rebound to a dummy stream that returns EOF. Output streams are reboud to forward their output to Stream.
  2. The process is detached from the current process-group and its controlling terminal. This is achieved using setsid() if provided or using ioctl() TIOCNOTTY on /dev/tty.

To ignore all output, it may be rebound to a null stream. For example:

      ...,
      open_null_stream(Out),
      detach_IO(Out).

The detach_IO/1 should be called only once per process. Subsequent calls silently succeed without any side effects.

See also
- detach_IO/0 and library(syslog).
 detach_IO is det
Detach I/O similar to detach_IO/1. The output streams are bound to a file /tmp/pl-out.<pid>. Output is line buffered (see set_stream/2).
See also
- library(syslog) allows for sending output to the Unix logging service.
Compatibility
- Older versions of this predicate only created this file if there was output.
  270detach_IO :-
  271    current_prolog_flag(pid, Pid),
  272    atom_concat('/tmp/pl-out.', Pid, TmpFile),
  273    open(TmpFile, write, Out, [alias(daemon_output)]),
  274    set_stream(Out, buffer(line)),
  275    detach_IO(Out).
  276
  277:- if(current_predicate(prctl/1)).  278:- export(prctl/1).
 prctl(+Option) is det
Access to Linux process control operations. Defines values for Option are:
set_dumpable(+Boolean)
Control whether the process is allowed to dump core. This right is dropped under several uid and gid conditions.
get_dumpable(-Boolean)
Get the value of the dumpable flag.
  291:- endif.  292
  293:- if(current_predicate(sysconf/1)).  294:- export(sysconf/1).
 sysconf(+Conf) is semidet
Access system configuration. See sysconf(1) for details. Conf is a term Config(Value), where Value is always an integer. Config is the sysconf() name after removing =_SC_= and conversion to lowercase. Currently support the following configuration info: arg_max, child_max, clk_tck, open_max, pagesize, phys_pages, avphys_pages, nprocessors_conf and nprocessors_onln. Note that not all values may be supported on all operating systems.
  307:- endif.  308
  309                 /*******************************
  310                 *           MESSAGES           *
  311                 *******************************/
  312
  313:- multifile
  314    prolog:message//1.  315
  316prolog:message(fork(join(T, Status))) -->
  317    [ 'Fork: joining thead ~p (status: ~p)'-[T, Status] ]