12.9 Foreign access to Prolog IO streams

The SWI-Prolog foreign language interface provides access to Prolog IO streams. This interface may be used to get hold of Prolog streams for reading and writing. In addition, this interface allows to define new stream types. For example, the Windows swipl-win.exe executable that runs Prolog in a Windows GUI redefines the Prolog standard IO streams (user_input, user_output and user_error to read from and write to the GUI window.

The interface is built around the IOSTREAM type which plays a role similar to the POSIX FILE type. Most of the functions are modeled after their FILE counterpart, prefixed by S, e.g. Sfwrite(). The IOSTREAM type has considerably more features though. The IOSTREAM type is practically disconnected from the rest of the Prolog system. Prolog refers to streams either by alias (user_input, etc. or created using the alias(Name) option of open/4) or using a stream handle which is represented as a blob (see section 12.4.10). Foreign extensions that wish to access or define streams should include SWI-Stream.h in addition to SWI-Prolog.h as below. Both headers may be used with C as well as C++.

The interface also defines Sinput, Suser, Serror for direct access to the operating system's input and output streams, bypassing Prolog's control - for example, these will not be affected by with_output_to/3. There is also a convenience function for debugging, which goes directly to stderr: Sdprintf().^{237On Windows the output is also emitted using OutputDebugString().}

#include <SWI-Stream.h>
#include <SWI-Prolog.h>

12.9.1 Get IO stream handles

There are several ways to get access to an IO Stream handle, basically get them from Prolog, get access to the standard streams and create a new stream. The standard streams are available as Sinput, Soutput and Serror. Note that these are thread specific. Creating a new stream is discussed with Snew(). Below are the functions to obtain a stream handle from a Prolog term, obtain and release ownership.

int PL_get_stream(term_t t, IOSTREAM **s, int flags)

Get a stream handle from the Prolog term t. Returns TRUE on success and FALSE on failure, by default generating an exception. The flags argument is a bitwise disjunction of these flags:

SIO_INPUT

Get an input stream. If t is a stream pair (see stream_pair/3), return the input channel. If t is an output stream the function fails.

SIO_OUTPUT

Get an output stream. See SIO_INPUT for details. If neither SIO_OUTPUT nor SIO_INPUT is given t may not be a pair.

SIO_NOERROR

If the function fails no exception is produced.

The returned stream is owned by the calling thread using PL_acquire_stream().

int PL_get_stream_from_blob(atom_t b, IOSTREAM **s, int flags)

Same as PL_get_stream(), but operates directly on the blob b. This allows for foreign code that wishes long term access to a stream to maintain a handle to the stream as a (registered) atom_t object rather than a IOSTREAM*.

IOSTREAM * PL_acquire_stream(IOSTREAM *s)

Obtain ownership of s and return s. The application must call PL_release_stream() when done. Only one thread can own a stream and this call blocks if some other thread owns the stream. This function may be called multiple times by the same thread (recursive lock). Note that PL_get_stream() also acquires ownership.

int PL_release_stream(IOSTREAM *s)

Give up ownership acquired using PL_acquire_stream() or PL_get_stream(). If the stream is an an error state, return FALSE with an exception. Otherwise return TRUE.

In general, stream functions do not set any Prolog error state; that is done by PL_release_stream(). Once a stream is in an error state, all subsequent functions act as no-ops (returning -1) unless Sclearerr() is called. Sferror() may be used to check whether a stream is in an error condition. This error may be turned into a Prolog exception by calling PL_acquire_stream() followed by PL_release_stream(). In this case, PL_release_stream() will set the Prolog exception and return FALSE.

Below is an example that writes “Hello World” to a stream provided by Prolog. Note that PL_release_stream() raises an exception if the Sfprintf() failed and (thus) left the stream in an error state.

static foreign_t
hello_world(term_t to)
{ IOSTREAM *s;

  if ( PL_get_stream(to, &s, SIO_OUTPUT) )
  { Sfprintf(s, "Hello World!\n");
    return PL_release_stream(s);
  }

  return FALSE;
}

  ... // fragment from install function
  PL_register_foreign("hello world", 1, hello_world, 0);

12.9.2 Creating an IO stream

A new stream is created using Snew(). Before we can create a stream we must create a function block of type IOFUNCTIONS that provide function pointers for the basic operations on the stream. This type is defined as follows:

typedef struct io_functions
{ Sread_function        read;           /* fill the buffer */
  Swrite_function       write;          /* empty the buffer */
  Sseek_function        seek;           /* seek to position */
  Sclose_function       close;          /* close stream */
  Scontrol_function     control;        /* Info/control */
  Sseek64_function      seek64;         /* seek to position (large files) */
} IOFUNCTIONS;

ssize_t (*Sread_function)(void *handle, char *buf, size_t bufsize)

Read new data into buf that has size bufsize, return the number of bytes read or -1. Note that this is the same interface as the POSIX read() API. See section 12.9.4 for raising errors.

ssize_t (*Swrite_function)(void *handle, char *buf, size_t bufsize)

Write the bytes from buf with contains bufsize bytes and return the number of bytes written or -1. The number of bytes written may be less than bufsize. Bytes that were not written remain in the stream's output buffer. Note that this is the same interface as the POSIX write() API. See section 12.9.4 for raising errors.

long (*Sseek_function)(void *handle, long pos, int whence)

int64_t (*Sseek64_function)(void *handle, int64_t pos, int whence)

Reposition the file pointer. These functions may be NULL if repositioning is not possible on this type or they may return -1 and set errno to EPIPE if the pointer cannot be repositioned on this instance. The function returns the new file position. See Sseek() for details on how repositioning is implemented. See section 12.9.4 for raising errors.

int (*Sclose_function)(void *handle)

Close the stream. This is used by Sclose(). Note that buffered output is first written using the Swrite_function(). See section 12.9.4 for raising errors.

int (*Scontrol_function)(void *handle, int action, void *arg)

Obtain information about the stream or modify the stream. The function should return 0 on success and -1 on failure. If some action is not implemented the function should return -1;

SIO_GETPENDING, size_t*

Return the number of bytes that may be written without blocking. Used by Spending().

SIO_LASTERROR, char*

Called after an error is raised on a stream. May return a C string that sets error details using Sseterr().

SIO_SETENCODING, IOENC*

Called by Ssetenc() to change the encoding of the stream. If the call does not return 0 the encoding is not changed.

SIO_FLUSHOUTPUT, NULL

Called by Sflush() after flushing the stream's output buffer. Note that this is only called on an explicit flush using Sflush() or flush_output/1. An implicit flush because the output buffer is full does not call this hook.

SIO_GETSIZE, int64_t*

Get the size of the underlying object in bytes. Used by Ssize().

SIO_GETFILENO, int*

If the stream is associated with an OS file handle, return this handle. Used by Sfileno().

SIO_GETWINSOCK, SOCKET*

Windows only. If the stream is associated to a Windows socket return this handle. Used by Swinsock().

Given an IOFUNCTIONS block we can create a new stream from a handle using Snew():

IOSTREAM* Snew(void *handle, int flags, IOFUNCTIONS *functions)

Create an IOSTREAM* from a handle, flags and a block of callback functions. The flags argument is a bitwise or of SIO_* flags. Flags that control the creation are:

SIO_INPUT

SIO_OUTPUT

One of these flags mut be present to indicate whether this is an input or output stream.

SIO_NBUF

SIO_LBUF

SIO_FBUF

One of these flags must be present to select the buffering as one of unbuffered (SIO_NBUF), line buffered (SIO_LBUF) or fully buffered (SIO_FBUF)

SIO_TEXT

If given, this is a text stream and the encoding is set to the default encoding (see the Prolog flag encoding). Otherwise this is a binary stream and the encoding is set to ENC_OCTET.

SIO_RECORDPOS

If given, enable position maintenance on the stream. This is used by Stell(), Sseek(), stream_property/2 using the position property and related predicates.

SIO_NOMUTEX

Used internally to create a stream that cannot be owned or locked.

If the stream is associated with an OS file handle the system initializes the SIO_ISATTY flag (on POSIX systems) and if possible tells the OS not to inherit this stream to child processes.

The symbol Sfilefunctions is a IOFUNCTIONS struct that contains the callbacks for accessing a regular file. After opening an file using the POSIX open() API we can create a stream to this file using Snew():

  int fno = open(path, O_RDONLY);
  IOSTREAM *s;

  if ( fno >= 0 )
    s = Snew((void*)fno,
             SIO_INPUT|SIO_FBUF|SIO_RECORDPOS|SIO_TEXT,
             &Sfilefunctions);
  ...

Snew() can only fail if there is not enough memory. In that case the return value is NULL and errno is set to ENOMEM.

IOSTREAM* Sopen_pipe(const char *command, const char *type)

Start a process from command and connect the input or output to the returned stream. This wraps the POSIX popen() API. The type string starts with r or w and may be followed by b to create a binary stream. The default is to create a text stream using the platform conventions and locale.

IOSTREAM* Sopenmem(char **buffer, size_t *sizep, const char *mode)

Open a memory area as a stream. Output streams are automatically resized using realloc() if *size = 0 or the stream is opened with mode "wa". If the buffer is allocated or enlarged, this is achieved using malloc() or realloc(). In this case the returned buffer should be freed by the caller when done. Example:

    { char buf[1024];             // don't allocate for small stuff
      char *s = buf;
      IOSTREAM *fd;
      size_t size = sizeof(buf);

      fd = Sopenmem(&s, &size, "w");
      ...
      Sclose(fd);
      ...
      if ( s != buf )             // appearently moved
        Sfree(s);
    }

The mode is "r" or "w". The mode "rF" calls PL_free(buffer) when closed.

Note: Its is not allowed to access streams created with this call from multiple threads. This is ok for all usage inside Prolog itself. This call is intended to use Sfprintf() and other output functions to create strings.

void Sfree(void *ptr)

This function must be used to free objects that are allocated by the stream interface. Currently this only applies to strings allocated by Sopenmem().

A stream can be made accessible from Prolog using PL_unify_stream():

int PL_unify_stream(term_t t, IOSTREAM *s)

Unify t with a blob that points at s. Note that a blob provides a unique and reliable reference to a stream. Blobs are subject to atom garbage collection. If an open stream is garbage collected the behaviour depends on the Prolog flag agc_close_streams. See also Sgcclose().

12.9.3 Interacting with foreign streams

int Sset_timeout(IOSTREAM *s, int milliseconds)

Set the timeout on an input stream to milliseconds. If this value is non-negative the the poll() or select() API is used to wait until input is available. If no input is available within the specified time an error is raised on the stream.

int Sunit_size()

Returns the size of a code unit in bytes depending on the stream's encoding. This returns 2 for the encodings ENC_UNICODE_BE and ENC_UNICODE_LE, sizeof(wchar_t) for ENC_WCHAR and 1 for all other encodings (including multibyte encodings such as ENC_UTF8.

int Sputc(int c, IOSTREAM *s)

Emit a byte to s. Flushes the buffer on \n when in SIO_LBUF buffering mode and updates the stream position information if enabled (SIO_RECORDPOS). Returns 0 on success, -1 on error.

int Sgetc(IOSTREAM *s)

Read a byte from s. Fills the input buffer if buffering is enabled and the buffer is empty. Updates the stream position information if enabled (SIO_RECORDPOS). Returns -1 on end of file or error. Use Sferror() or Sfeof() to distinguish end of file from an error. This is a C macro.

int Sfgetc(IOSTREAM *s)

Function equivalent to Sgetc().

int Sungetc(int c, IOSTREAM *s)

Put a byte back into the input buffer. Returns -1 if this is not possible. Deprecated. New code should use Speekcode() because that reliably maintains the position information on the stream.

int Sputcode(int c, IOSTREAM *s)

Emit a Unicode code point to s. This function also performs newline encoding (see section 12.9.6). If the encoding of s cannot represent c, the behaviour depends on the the following flags. Only one of these flags may be enabled. If none of these flags is enabled an error is raised and the function returns -1.

SIO_REPXML

Emit as XML character entity, e.g. ႒

SIO_REPPL

Emit as ISO escape, e.g., \x4242\

SIO_REPPLU

Emit as Unicode escape, e.g., \u4242 or \U42424242

Updates the stream position information if enabled (SIO_RECORDPOS)

int Sgetcode(IOSTREAM *s)

Read a Unicode code point from s. If it detects an invalid multibyte character a warning is emitted and the code point 0xfffd is returned. Other errors and end-of-file return -1; Use Sferror() or Sfeof() to distinguish end of file from an error.

int Speekcode(IOSTREAM *s)

As Sgetcode(), but leaves the character in the input buffer and does not update the stream position. Returns -1 if the stream is not buffered (SIO_NBUF).

int Sputw(int w, IOSTREAM *s)

int Sgetw(IOSTREAM *s)

Reads/writes an integer in native byte order. Deprecated.

size_t Sfread(void *data, size_t size, size_t elems, IOSTREAM *s)

size_t Sfwrite(const void *data, size_t size, size_t elems, IOSTREAM *s)

Emulations of the POSIX fread() and fwrite() calls for Prolog streams. These functions read or write elems objects of size size and return the number of objects successfully read or written. Data exchange is binary (even if the stream is in text mode) and unlike read() and write(), these functions keep reading or writing until end-of-file (for Sfread()) or an error.

int Sfeof(IOSTREAM *s)

Returns non-zero if the stream is at the end. It performs the following checks: (1) test the SIO_FEOF flag, (2) test whether the buffer is non-empty, (3) fill the buffer and return non-zero if the Sread_function() returned 0 (zero).

int Sfpasteof(IOSTREAM *s)

Returns non-zero when a read operation was performed after signalling end-of-file. On other words, reaching end-of-file first triggers Sfeof() and after another read triggers Sfpasteof().

int Ssetlocale(IOSTREAM *s, struct PL_locale *new_loc, struct PL_locale **old_loc)

Change the locale associated with a stream. The current system does not provide a public C API for dealing with Prolog locale objects. See section 4.23.

int Sflush(IOSTREAM *s)

Flush buffered output, returning 0 on success and -1 after a (write) error occurred. Calls Scontrol_function() using the action SIO_FLUSHOUTPUT after the buffer was successfully written.

int64_t Ssize(IOSTREAM *s)

Returns the size in bytes of the object associated to the stream or -1 if this is not known.

int Sseek(IOSTREAM *s, long pos, int whence)

int Sseek64(IOSTREAM *s, int64_t pos, int whence)

Reposition the file pointer in the object associated to s, returning 0 on success and -1 otherwise. If the stream is buffered and position information is maintained these functions readjust the buffer information if possible. Otherwise they call Sseek64_function() or Sseek_function() as a fallback iff pos can be represented as a C long. Whence is one of SIO_SEEK_SET, SIO_SEEK_CUR or SIO_SEEK_END, seeking relative to the start, current position or end.

long Stell(IOSTREAM *s)

int64_t Stell64(IOSTREAM *s)

Return the current position in the stream. This is obtained from the recorded position or based on information from the seek handlers, adjusted with the buffer information.

int Sclose(IOSTREAM *s)

Close the stream. This first locks the stream (see PL_acquire_stream()). When successful it flushes pending output and calls the Sclose_function() hook. Finally, the stream is unlocked and all memory associated to the stream is released. On success, the function returns 0. On failure a Prolog exception is raised and the return value is -1. Regardless of the return value, s becomes invalid after completion of Sclose(). See also Sgcclose().

int Sgcclose(IOSTREAM *s, int flags)

As Sclose(), but intended to be used from the atom garbage collector if a stream is closed because it is garbage. The SWI-Prolog atom garbage collector normally runs in a separate thread and thus may be unable to obtain a lock on s if some thread lost access to the stream while it is locked. For this situation flags may be SIO_CLOSE_TRYLOCK which causes Sgcclose() to return -1 with errno set to EDEADLK if the stream is locked. Alternatively, using SIO_CLOSE_FORCE the stream is closed and released without gaining a lock. This should be safe because the stream is garbage and thus no thread can use the lock.

In addition, Sgcclose() never raises a Prolog exception because Prolog interaction is not allowed from the blob release hook and there is no meaningful way to raise a Prolog exception from this context.

char* Sfgets(char *buf, int n, IOSTREAM *s)

Read a line of input as a sequence of bytes. The buf is n bytes long. On success, buf is returned and contains a 0-terminated C string that ends with a \n character. On end-of-file or an error, NULL is returned. If the input line is longer that n bytes buf is not 0-terminated.

int Sgets(char *buf)

Shorthand for Sfgets(buf, Slinesize, Sinput). Deletes the terminating \n character. Slinesize is a global variable that defines the length of the input buffer. Deprecated.

int Sread_pending(IOSTREAM *s, char *buf, size_t limit, int flags)

Return the data buffered on an input stream. If flags includes SIO_RP_BLOCK, fill the buffer (possibly blocking) if the buffer is empty. Update the stream position information unless flags include SIO_RP_NOPOS. This function effectively provides functionality similar to POSIX read() on a stream. This function is used by read_pending_codes/3.

size_t Spending(IOSTREAM *s)

Return the number of bytes that can be read from s without blocking. If there is buffered input, this is the number of bytes buffered. Otherwise it is the result of the Scontrol_function() using the action SIO_GETPENDING.

int Sfputs(const char *q, IOSTREAM *s)

Emit a 0-terminated C string. The input string q is handled as a sequence of unsigned characters (code points 1 ... 255.

int Sputs(const char *q)

Equivalent to Sfputs(q, Soutput).

int Sfprintf(IOSTREAM *s, const char *fm, ...)

Similar to POSIX fprintf(). This function largely accepts the same % escape sequences. The % character is followed by numeric arguments and modifier characters. The generic format of this is described by the regular expression [+-0 #]*(\d*|\*)(.(\d*|\*))?. Here, + implies right alignment, - left alignment, 0 0-padding and, a space white-space padding and # modified output. The two optional numerical arguments are separated by a full stop and may be * to get them from the argument list. The first numerical argument specifies the field width and the second the precision for floating point numbers.

This sequence is followed by optional type information. For integers this is one of l (long), ll (long long) or z (size_t). For strings this is one of L (ISO Latin 1), U (UTF-8) or W (wchar_t*).

Finally we come to the format specifier. This is one of

%
Emit the % character itself.

c
Emit a Unicode code point.

p
Emit a pointer.

d

i
Emit a a signed integer as decimal. The l (long), ll (long long) or z (size_t) denote the size.

o

u

x

X
Emit a a unsigned integer as octal, decimal or hexadecimal.

f

e

E

g

G
Emit a double.

s
Emit a 0-terminated string.

Unlike the POSIX fprintf(), this function, and the related functions (Svprintf(), etc.) returns the number of characters written. Due to multibyte encodings the number of bytes written can be more. On error, it returns a negative value; in some cases there is extra information (e.g., in errno) but it cannot be relied on.

Each call to Sfprintf() is atomic in the sense that another thread that calls Sfprintf() on the same stream will block. If you wish to do a series of print statements without any other thread interleaving, you should call PL_acquire_stream() and use its returned IOSTREAM* value, then call PL_release_stream() at the end of the print statements.

int SfprintfX(IOSTREAM *s, const char *fm, ...)

Same as Sfprintf() but doesn't have the format-checking attribute, which can trigger compiler warnings if the format does not match the arguments. This is intended for formats that include extended format specifiers such as "%Ws" or "%Us".

int Sprintf(const char *fm, ...)

Similar to Sfprintf(), printing to Soutput

int Svprintf(IOSTREAM *s, const char *fm, va_list args)

Variadic argument list version of Sfprintf().

int Ssprintf(char *buf, const char *fm, ...)

Print to a C string. Deprecated. Use Ssnprintf() instead.

int Ssnprintf(char *buf, size_t size, const char *fm, ...)

Print to a C string, emitting a maximum of size bytes while ensuring buf is 0-terminated. The buf is written using UTF-8 encoding. Unlike snprintf(), the return value is the number of logical code points written rather than the number of bytes and if the buffer is too small, -1 is returned rather than the number of bytes that would be written. Future versions may improve compatibility with the POSIX functions.

int SsnprintfX(char *buf, size_t size, const char *fm, ...)

Same as Ssnprintf() but doesn't have the format-checking attribute. This is intended for formats that include extended format specifiers such as "%Ws" or "%Us".

int Svsprintf(char *buf, const char *fm, va_list args)

Variadic argument list version of Ssprintf(). Deprecated. Use Svsnprintf() instead.

int Svsnprintf(char *buf, size_t size, const char *fm, va_list args)

Variadic argument list version of Ssnprintf().

int Sdprintf(const char *fm, ...)

Print to Serror. This function should be used for printing debug output from foreign code.

int SdprintfX(const char *fm, ...)

Same as Sdprintf() but doesn't have the format-checking attribute. This is intended for formats that include extended format specifiers such as "%Ws" and "%Us".

int Svdprintf(const char *fm, va_list args)

Variadic argument list version of Sdprintf().

int Slock(IOSTREAM *s)

int StryLock(IOSTREAM *s)

int Sunlock(IOSTREAM *s)

Low level versions that perform only the (un)locking part of PL_acquire_stream() and PL_release_stream().

int Sfileno(IOSTREAM *s)

If the stream is associated to a POSIX file handle, return this handle. Returns -1 otherwise.

SOCKET Swinsock(IOSTREAM *s)

Windows only. If the stream is associated to a Windows socket handle, returns this handle. Otherwise return INVALID_SOCKET

int Sclosehook(void (*hook)(IOSTREAM *s))

Register a hook function to be called by Sclose() just before the stream is deallocated. This is used internally to update the Prolog administration of open streams on Sclose().

int Sset_filter(IOSTREAM *parent, IOSTREAM *filter)

Register filter as a stream that reads from or writes to the stream parent.

void Ssetbuffer(IOSTREAM *s, char *buf, size_t size)

Set the input or output buffer for s to size. The buf argument is either NULL, asking the system to allocate a buffer or points at a buffer of (at least) the indicated size long. The default buffer size is defined by the C macro SIO_BUFSIZE

12.9.3.1 Writing Prolog terms to foreign streams

int PL_write_term(IOSTREAM *s, term_t term, int precedence, int flags)

Write term to s. precedence is the initial operator precedence, typically 1200. flags is a bitwise or of the constants below. These flags map to options for write_term/2.

PL_WRT_QUOTED

PL_WRT_IGNOREOPS

PL_WRT_NUMBERVARS

PL_WRT_PORTRAY

PL_WRT_CHARESCAPES

PL_WRT_NO_CHARESCAPES

The PL_WRT_NO_CHARESCAPES does not map to a write_term/2 option. If one of PL_WRT_CHARESCAPES or PL_WRT_NO_CHARESCAPES is specified, character escapes are (not) applied. If neither is specified the default depends, like for write/1, on the character_escapes flag on the module user.^{238Prior to version 9.1.6 the default (no flag) was to escape the quotes and the backslash (\).}

PL_WRT_BACKQUOTED_STRING

PL_WRT_ATTVAR_IGNORE

PL_WRT_ATTVAR_DOTS

PL_WRT_ATTVAR_WRITE

PL_WRT_ATTVAR_PORTRAY

PL_WRT_BLOB_PORTRAY

PL_WRT_NO_CYCLES

PL_WRT_NEWLINE

PL_WRT_VARNAMES

PL_WRT_BACKQUOTE_IS_SYMBOL

PL_WRT_DOTLISTS

PL_WRT_BRACETERMS

PL_WRT_NODICT

PL_WRT_NODOTINATOM

PL_WRT_NO_LISTS

PL_WRT_RAT_NATURAL

PL_WRT_CHARESCAPES_UNICODE

PL_WRT_QUOTE_NON_ASCII

PL_WRT_PARTIAL

For example, to print a term to user_error as the toplevel does, use

    PL_write_term(Suser_error, t, 1200,
                  PL_WRT_QUOTED|PL_WRT_PORTRAY|
                  PL_WRT_VARNAMES|PL_WRT_NEWLINE)

12.9.4 Foreign stream error handling

int Sferror(IOSTREAM *s)

Returns TRUE if the stream is in an error condition, FALSE if the stream is valid and in normal condition and -1 if the stream is invalid.

void Sclearerr(IOSTREAM *s)

Clear the error state of a stream. This includes the end-of-file state, pending warnings and errors and timeout.

int Sseterr(IOSTREAM *s, int which, const char *message)

Set an error or warning state on the stream. The which argument is one of SIO_WARN or SIO_FERR. This causes PL_release_stream() to print a message (SIO_WARN) or raise an exception (SIO_FERR).

int Sset_exception(IOSTREAM *s, term_t ex)

Associate a Prolog exception term with the stream or clear the associated exception if ex is 0 and set/clear the SIO_FERR condition on the stream. If an exception is assocated PL_release_stream() raises this exception.

12.9.5 Foreign stream encoding

IOSTREAM has a field encoding that is managed at initialization from SIO_TEXT. The available encodings are defined as a C enum as below.

typedef enum
{ ENC_UNKNOWN = 0,                      /* invalid/unknown */
  ENC_OCTET,                            /* raw 8 bit input */
  ENC_ASCII,                            /* US-ASCII (0..127) */
  ENC_ISO_LATIN_1,                      /* ISO Latin-1 (0..256) */
  ENC_ANSI,                             /* default (multibyte) codepage */
  ENC_UTF8,
  ENC_UNICODE_BE,                       /* big endian unicode file */
  ENC_UNICODE_LE,                       /* little endian unicode file */
  ENC_WCHAR                             /* wchar_t */
} IOENC;

Binary streams always have the encoding ENC_OCTET. The default encoding of a text stream depends on the Prolog flag encoding. The encoding is used by all functions that perform text I/O on a stream. The encoding can be changed at any moment using Ssetenc() which is available from Prolog using the set_stream/2 encoding(Encoding) property. Functions that explicitly manage the encoding are:

int Ssetenc(IOSTREAM *s, IOENC new_enc, IOENC *old_enc)

Set the encoding for s to new_enc and, if old_enc is not NULL, return the old encoding. This function may fail, returning -1 if the Scontrol_function() of the stream returns -1 on the SIO_SETENCODING request. On succcess it returns 0. If new_enc is ENC_OCTET the stream is switched to binary mode. Otherwise text mode is enabled.

int ScheckBOM(IOSTREAM *s)

This function may be called on a buffered input stream immediately after opening the stream. If the stream starts with a known Byte Order Mark (BOM) the encoding is set accordingly and the flag SIO_BOM is set on the stream. Possibly resulting encodings are ENC_UTF8, ENC_UNICODE_BE and ENC_UNICODE_LE.

int SwriteBOM(IOSTREAM *s)

This function writes a Byte Order Mark (BOM) to s and should be called immediately after opening a stream for writing. If the encoding is one of ENC_UTF8, ENC_UNICODE_BE or ENC_UNICODE_LE it writes the code point \ufeff (a zero-width white space) to the stream in the current encoding and sets the SIO_BOM flag on the stream.

int Scanrepresent(int c, IOSTREAM *s)

Returns 0 if the encoding of s can represent the code point c and -1 otherwise.

12.9.6 Foreign stream line endings

Text streams have a field newline that controls the handling of the newline convention. Note that inside Prolog all lines end with a single newline (\u000a, \n) code point. The values are described below. The default depends on the OS and can be manipulated using the newline(Mode) property of set_stream/2.

SIO_NL_DETECT

This mode may be enabled on an input stream. It causes the stream to read up to the first newline to set the newline mode accordingly.

SIO_NL_POSIX

Do not do any translation on input or output.

SIO_NL_DOS

Emit a newline (\n) as \r\n. Discard \r from the input.^{239The current implementation does not check that the character is followed by \n.}

12.9.7 Foreign stream position information

The IOSTREAM has a field position that points at a structure of type IOPOS. This structure is defined as below.

typedef struct io_position
{ int64_t               byteno;         /* byte-position in file */
  int64_t               charno;         /* character position in file */
  int                   lineno;         /* lineno in file */
  int                   linepos;        /* position in line */
  intptr_t              reserved[2];    /* future extensions */
} IOPOS;

If a stream is created using the flag SIO_RECORDPOS the IO functions maintain the position information. Note that, supporting the ISO stream position data (see stream_property/2), both the byte and character position is maintained. These may differ if the stream uses a multibyte encoding.

The linepos is updated as follows: \n and \r reset the position to 0 (zero). The backspace (\b) decrements the position if it is positive. The tab (\t) tabs to the next multiple of 8. Any other character increments the line position by one. Future versions may change that, notably the tab width might no longer be hard coded.

12.9.8 Support functions for blob save/load

The functions in this sections are intended to support blobs to define save() and load() functions so they can be part of a saved state or .qlf file. The matching pair of functions is guaranteed to give the same result, regardless of byte ordering (big or little endian). The user must not make any assumptions on the exact data format used for storing the data. The atom read/write functions can only be used from the blob callback functions.

For saving an uninterpreted array of bytes, it is suggested that the length is output as a size_t value using PL_qlf_put_uint32() followed by the bytes using Sfwrite(); and for loading, the length is read using PL_qlf_get_uint32(), a buffer is allocated, and the bytes are read using Sfread().

int PL_qlf_put_int64(int64_t i, IOSTREAM *s)

int PL_qlf_put_int32(int32_t i, IOSTREAM *s)

int PL_qlf_put_uint32(uint32 i, IOSTREAM *s)

Write integers of several sizes. Signed integers are written in zigzag encoding. For unsigned integers we only write the non-zero bytes. The result is compact and the same for big or little endian.

int PL_qlf_put_double(double f, IOSTREAM *s)

Write double as 8 byte big endian.

int PL_qlf_put_atom(atom_t a, IOSTREAM *s)

Write an atom. The atom may be a blob. Note that this function may only be used from a blob save() function. Calling from another context results in a fatal error.

int PL_qlf_get_int64(IOSTREAM *s, int64_t *ip)

int PL_qlf_get_int32(IOSTREAM *s, int32_t *ip)

int PL_qlf_get_uint32(IOSTREAM *s, uint32_t *ip)

int PL_qlf_get_double(IOSTREAM *s, double *fp)

Counterparts of corresponding PL_qlf_put_*() functions.

int PL_qlf_get_atom(IOSTREAM *s, atom_t *ap)

Counterpart of PL_qlf_put_atom(). Again, this may only be used in the context of a blob load() function.